How to Use Polar Scope Metal Illuminator
- Install the batteries:
-
Unscrew the illuminator body.
-
-
Insert two LR754 cell batteries into the battery compartment. If you want to get some backup batteries, please check it on ebay or amazon.

-
Screw the illuminator body back together to secure the batteries.

-
Attach to the polar scope: Screw the illuminator into the threaded hole on Polar Scope A.

-
Turn on the illuminator: Rotate the top knob to the right to activate the red light.

-
Align and Fine-Tune: You are ready to do the polar alignment now. During alignment, you can adjust the red light brightness by turning the knob left or right as needed.

