Skywatcher Star Adventurer GTi / Skywatcher Star Adventurer/Skywatcher Star Adventurer2i//Skywatcher Star Adventurer mini/iOptron Skyguider Pro- MSM Laser Kit
- Free worldwide shipping
- In stock, ready to ship
- Inventory on the way
All orders will be scheduled for shipment in 1 to 3 business days, excluding holidays.
COUNTRIES
We ship worldwide.
WAREHOUSES
Currently, we have 4 warehouses.
🇺🇸 US warehouse, for our US users, parcel usually arrives in 1-7 days.
🇪🇺 EU warehouse, for most EU countries, parcel usually arrives in 1-7 days.
🇦🇺 AU warehouse, for our Australia and New Zealand users, parcel usually arrives around 1-7 days.
🇨🇳 CN warehouse, for all countries, parcel arrives in 4-7 or 8-20 days, please check below for details.
Satisfaction Guaranteed
30-days full refund Warranty.
If you received a defective one, don’t worry, we will resend you a new one immediately. Up until now, the defective rate is less than 1%.
If you do not want to keep it anymore within 30 days, return to us, and you will get a full refund. In this case, you just need to pay the returning shipping fee.
1 Year Warranty
If it malfunctions, we will exchange it for a new one for you ALL at our expense.
⬇️Check what our users say about us⬇️




Tips before purchase
For Skywatcher users,
The adapter will fit the polar scope with a diameter of around 29.03mm.
Compatibility:
SkyWatcher HEQ5
For iOptron users,
Please check the housing around the polar scope of your iOptron before you purchase.
There are 2 versions of iOptron adapters. Both adapters can't work with iPolar. And it could not work with (iOptron SkyTracker Pro and SkyGuider™) Tracking Equatorial Mount, if you have any doubts, please contact our support (support@movehsootmove.com) before the purchase.
1) the first version-threaded part inside
Please choose this version if the housing around the polar scope of iOptron Skyguider Pro has internal threads
Please refer to the example below.
2) the second version-threaded part outside
Please choose this version if the housing around the polar scope of iOptron Skyguider Pro has outside threads.
Please refer to the example below.

Check how "Quick Polar Finder" works!
Quick Polar Finder for Skywatcher Star Adventurer/Skywatcher Star Adventurer2i
Quick Polar Finder for iOptron Skyguider Pro
Introduction
A thank you note
Notice
- Quick Polar Finder only works at locations where Polaris is visible.
- Quick Polar Finder includes a 520-532nm laser pointer with an output less than 5mw. Please refer to local laws for regulation on laser products before purchasing.
Specification
Material |
Aluminum alloy |
Color |
Black |
Dimension(mm) |
40*40*31.5 |
Weight(g) |
82.5g(pointer included) |
Compatibility |
iOptron Skyguider pro |
Material |
Aluminum alloy |
Color |
Black |
Dimension(mm) |
35*37.5*40.5 |
Weight(g) |
107.6g(pointer included) |
Compatibility |
Skywatcher Star Adventurer |
Installation
1) Remove the cap of the pointer
2) Screw the pointer into the adapter


3) Mount the Quick Polar Finder to the polar scope port of Skywatcher Star Adventurer*/ iOptron Skyguider Pro.

Package Contents:
Option 1: For iOptron SkyGuider ProiOptron Adapter x 1
Option 2: For Skywatcher Star Adventurer
Sky Watcher Star Adventurer Adapter x 1
*For the Skywatcher Star Adventurer, when properly installed, Quick Polar Finder will not be perfectly aligned with the polar scope. This is normal and it's been tested that the laser beam will go straight through the polar scope, thus not affecting polar alignment.
I took this out in my front yard for the first time and I had alignment within just a few seconds that was good enough for 2 minute exposures. I haven't tried anything beyond two minutes because I'm still using the factory base for the Sky Guider Pro and once I've upgraded to the Williams Optics base for my tracker then I'll try longer exposure times. It's a great product. I'm 6'5" so getting down on the ground to look thru the reticle was a real pain. I'm very impressed with this little setup. It took it a minute to get it from overseas. It would have been nice if they stocked those items in the U.S.
This Laser kit is ideal for the Sky Watcher Adventure 2i which fits perfect and allows alignment with Polaris. After lining it up you can use the embedded scope to fine-tune your alignment. I am glad I purchased it!
Even with a fully charged battery it does not shine brightly enough if it gets cold. So far I've only used it in 40 to 50 degree weather and unless I've kept it warm by keeping it in my front pocket hey could not be useful. If I had to use it again even a few minutes later it would not be bright enough to be useful.
It does make the initial polar alignment much easier And where I have a small battery pack and a lens warmer that I can use to keep it warm I'm happy with what I have.
Skywatcher Star Adventurer GTi / Skywatcher Star Adventurer/Skywatcher Star Adventurer2i//Skywatcher Star Adventurer mini/iOptron Skyguider Pro- MSM Laser Kit
Well build but I've not try it yet. Will give a product review once i've used it!
The laser kit is very easy to use, makes the polar alignment a breeze, literary it only takes a minute to precise polar align the mount. I would highly recommend the product.
Watch the video on the website, you really can find polaris and set up the tracker in a very quick time. No more hunting around :)
Not used yet but looks like a good piece of kit.
The laser kit works great, helps a lot. Only problem was the large amount of time it took to get here.
Definitely recommend this little gadget. Watch the video on the website, you really can find polaris and set up the tracker in a very quick time. No more hunting around for an hour (and I have done that!!), it works like a charm