How to Adjust the Beam of the new Adjustable Laser Pointer

  1. First, you need to mount the laser pointer to the rotator on a steady tripod. 
  1. Loosen the holding screw of the laser pointer. Turn it on and rotate it in 360 degrees, you'll see its beam draws a circle.
  1. Mark the leftest dot and rightest dot the laser hits.

  1. Find the center dot and mark it. 

  1. Insert the wrench provided in the X&Y screw holes. Adjust the beam by screwing the X and Y screws, until the laser hits the middle mark. (X adjustment is up and down and Y adjustment is left and right)