Quick Guide for Harmonic I: How to Use and Set Up

The official Harmonic I manual is still being prepared. In the meantime, please refer to this quick guide for basic setup and operation.

The operation of Harmonic I is very similar to NOMAD.

1. Turn on Harmonic I
Slide the button to N or S mode to turn on the Harmonic I.

2. Turn on/off the laser
Long-press the button with the "Polaris" icon to turn on the laser. Long-press again to turn it off.

3. Start shooting
Attach your ballhead or camera to the Harmonic I, complete your polar alignment, and start shooting.

Please also check the setup video guide:https://youtu.be/umMZj3T7SZ4?si=eoi4OQflnwLNqqNX

Charging

Please use a power source with a 5V 1–2A output. We recommend using the original charging cable included with the Harmonic I, which has a USB connector on one end and a USB-C connector on the other end.

There are two charging ports on the Harmonic I. One of them is reserved for future development of additional functions. Currently, both ports can be used for charging.