Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro
Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro

Kit d’alignement laser MSM pour Sky-Watcher Star Adventurer GTi, Star Adventurer, Star Adventurer 2i, Star Adventurer Mini et iOptron SkyGuider Pro

Prix régulier $59.99 Prix réduit$49.99
/
  • Livraison gratuite dans le monde entier pour toute commande supérieure à 99 $
Klarna
Pay in installments with Klarna
Interest-free options available for eligible purchases.

DÉLAI DE TRAITEMENT
Toutes les commandes seront programmées pour expédition sous 1 à 3 jours ouvrables, hors jours fériés.

PAYS
Nous expédions dans le monde entier.

ENTREPÔTS
Actuellement, nous disposons de 5 entrepôts.
🇺🇸 Entrepôt US, pour nos utilisateurs américains, les colis arrivent généralement en 4 à 7 jours.
🇨🇦 Entrepôt Canada, pour nos utilisateurs canadiens, les colis arrivent généralement en 4 à 8 jours.
🇪🇺 Entrepôt UE, pour la plupart des pays de l’UE, les colis arrivent généralement en 4 à 7 jours. (Sans taxes)
🇦🇺 Entrepôt AU, pour nos utilisateurs en Australie et Nouvelle-Zélande, les colis arrivent généralement en 4 à 7 jours.
🇨🇳 Entrepôt CN, pour tous les pays, les colis arrivent en 4 à 7 ou 8 à 20 jours. Veuillez vérifier ci-dessous pour plus de détails.

Pour plus d’informations, cliquez ici.

Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.

Introduction

L’alignement polaire avec un pointeur laser est intuitif, pratique et accessible aux débutants, mais cela n’a été possible jusqu’à présent qu’avec le star tracker Move Shoot move. Nous souhaitons partager le plaisir du laser avec d’autres star trackers populaires, à savoir le SkyWatcher Star Adventurer et l’iOptron SkyGuider pro.

Présentation du Quick Polar Finder. Fixez-le sur votre monture équatoriale, visez l’étoile polaire avec le faisceau laser et vous obtenez un alignement assez proche. Pour la photographie astro-paysage, vous pouvez commencer à prendre des photos immédiatement. Pour la photographie d’objets du ciel profond, il suffit de retirer le Quick Polar Finder et de faire un alignement précis avec le chercheur polaire. Dans les deux cas, vous pouvez photographier le ciel en beaucoup moins de temps et probablement épargner votre dos sur le long terme.

Avis de sécurité : Veuillez utiliser le laser de manière responsable et éviter de le diriger vers des avions, véhicules, personnes ou yeux. Allumez le laser uniquement lorsque cela est nécessaire lors de l'alignement polaire.

*Pour le Skywatcher Star Adventurer, une fois correctement installé, le Quick Polar Finder ne sera pas parfaitement aligné avec le chercheur polaire. C'est normal et il a été testé que le faisceau laser traversera directement le chercheur polaire, sans affecter l'alignement polaire.

Un mot de remerciement

L’adaptateur laser « rouleau de papier toilette » de Glen Tillyard pour son SkyWatcher Star Adventurer nous a inspirés à repenser notre prototype initial. Nous apprécions sa généreuse divulgation de ce travail ingénieux !

Avis

  • Quick Polar Finder ne fonctionne que dans les endroits où l’étoile polaire est visible.
  • Quick Polar Finder comprend un 520-532nm pointeur laser avec une puissance inférieure à 5mw. Veuillez vous référer aux lois locales concernant la réglementation des produits laser avant l’achat.

Pour les utilisateurs de Skywatcher, 

L’adaptateur s’adapte au chercheur polaire d’un diamètre d’environ 29,03 mm. 

Compatibilité : 

Skywatcher Star Adventurer GTi
Skywatcher Star Adventurer
Skywatcher Star Adventurer2i
Skywatcher Star Adventurer mini

SkyWatcher HEQ5

Pour les utilisateurs d’iOptron, 

Veuillez vérifier le boîtier autour du chercheur polaire de votre iOptron avant d'acheter.

Ce kit laser est conçu uniquement pour le SkyGuider™ Pro qui possède un boîtier de chercheur polaire avec des filetages internes.

⚠️ Note :
Ce kit laser n'est pas compatible avec :

  • SkyGuider™ Pro avec version iPolar

  • iOptron SkyTracker™ Pro

  • SkyGuider™ Pro qui possède un boîtier de chercheur polaire avec filetage externe 

Découvrez comment fonctionne le "Quick Polar Finder" !

Quick Polar Finder pour Skywatcher Star Adventurer/Skywatcher Star Adventurer2i

Quick Polar Finder pour iOptron Skyguider Pro

Spécifications

Pour iOptron SkyGuider Pro

Matériau

Alliage d'aluminium

Couleur

Noir

Dimensions (mm)

40*40*31.5

Poids (g)

82,5 g (pointeur inclus)

Compatibilité

iOptron Skyguider pro

Pour Skywatcher Star Adventurer

Matériau

Alliage d'aluminium

Couleur

Noir

Dimensions (mm)

35*37.5*40.5

Poids (g)

107,6 g (pointeur inclus)

Compatibilité

Skywatcher Star Adventurer


Installation

1) Retirez le capuchon du pointeur

2) Vissez le pointeur dans l'adaptateur

3) Montez le Quick Polar Finder sur le port du chercheur polaire du Skywatcher Star Adventurer*/ iOptron Skyguider Pro.

Installation terminée.

Contenu du paquet :

Option 1 : Pour iOptron SkyGuider Pro
Pointeur laser 5mw  x 1
Adaptateur iOptron x 1

Option 2 : Pour Skywatcher Star Adventurer

Pointeur laser 5mw  x 1
Adaptateur Sky Watcher Star Adventurer x 1
Vis en nylon (M10*15) x 1

 


  • 5 stars: 187 (91%)
  • 4 stars: 10 (5%)
  • 3 stars: 4 (2%)
  • 2 stars: 3 (1%)
  • 1 star: 2 (1%)
S
Serdar Ankun (Ankara, TR)
Great tool

Although the laser kit's website says it's not compatible with the Ioptron Skyguider Pro+ipolar, I disassembled the ipolar and the laser kit fit perfectly. Now it's time to get out in the field and try it out. Thank you for this easy equipment.

S
Samantha Hayward (Philadelphia, US)
Awesome Tool

I am new to using IOptron Skyguider Pro, and was having a hard time polar aligning. Then I saw this mention on Facebook, so I decided to try it.
It made it so much easier to get on to Polaris. Got exposures at 180sec!!

R
Robert Willis (Croydon, GB)
MSM laser kit.

I have recently picked up a Sky-Watcher Gti as a more weightier mount for the back garden,
Normal sketch with these trackers I struggle to make that all important polar alignment.

As I already own the MSM Nomad as my lighter weight portable tracker, the Laser pen that comes with this option & simply screws to the back of the mount is amazing, so when I saw that MSM offers a laser pen for the Gti, I ordered it straight away along with a MSM lens warmer.

As with all my orders from MSM, it turned up in good time, with plenty of com’s to let me know what’s happening with the order & delivery,

It’s such a simple but very clever little addition to the laser pen, and the fact that you can just pop it over the Gti view finder, pinch the grub screw up and away you go, the green light shines through the Gti’s viewing tube and makes alignment so much easier and stress free, once Polaris is in the view finder, I usual hope into the SynScan app to make those all important adjustments with the time clock..
I personally wouldn’t be without it now, a couple of friends say I’m cheating, I can’t see the point in flaffing around in the dark trying to find Polaris.
I’m very happy to watch them fiddle, while I’m already set up and capturing the night sky targets . 📸🌟

D
Daryl Wilson (Hixon, CA)
Ioptron Laser Pointer

Received the laser pointer very quickly, and have experimented to set up for night sky photography, i found the set up to be very efficient and was able to get a photo with very clear stars well worth the purchase.

I
Ian Barredo (Regina, CA)
A must have accessory for iOptron Skyguider

I found this polar alignment guide to be extremely useful, especially when using a low tripod for widefield Milkyway shots. It is easier to get a rough polar alignment and fine tune it after. Highly recommend!

D
Douglas Wiese (Lake Stevens, US)
Skywatcher Star Adventurer is almost perfect

Works as advertised flawlessly. However, the battery door design is poor. Removing the attach screw is almost impossible to not drop it. It would be nice if the Skywatcher was offered in a bundle. Like offering a laser for polar alignment, 90 degree eye piece, camera mounting brackets and maybe DSLR camera remote release cables.

J
JOE WARD (Fontana, US)
MSM Laser Kit - A definite "Must Have" . . .

Bought this for my newly acquired Sky-Watcher Star Adventurer 2i and have yet to use PS Align Pro or even look through the unit so far. Last night up in Joshua Tree NP I was able to click the polar finder to get a "pulse" . . . a temporary bright solid beam and direct it at Polaris. Made it real easy. The stars in my long exposures of the Milky Way are sharp and even though I fully intend to delve into polar aligning the unit by all the other means this laser makes it so much less intimidating to set up the Sky Watcher and let's me concentrate on capturing the Night sky. Thank You MSM! ( Canon 5D MKIII 16-35mm 2.8L 25sec f/2.8 ISO 1600)

J
John Lee (Torquay, GB)
MSM Laser Kit

Have used this a few times now out in the field. Attaches to the Ioptron Skyguider Pro easily and has placed the polar scope very close to Polaris with just small adjustments required. This item has made polar alignment very easy and can now be completed very accurately within a couple of minutes.

S
Scott Dallon (Layton, US)
I have 3 Move Shoot Move Products I use on my Star Adventure

All 3 work better than expected. My polar alignment and pin pointing my dso takes seconds. It's never been faster, or easier. I start with my laser pointer. It slips on my polar scope precisely every time. Once I point at Polaris, I slip it off and slip on the right angle viewer. Everytime Polaris is clearly in the reticle. With a little fine tuning of the adjustment screws, Polaris and the polar clock are perfectly aligned. I am able to do everything with my camera already mounted. To find my dso, I use the laser and the Universal Mount Combo. I slide the combination into my camera hot shoe, point it at the dso, and my object is clearly in my lens....so easy and fast. Thanks team, you've made the hardest part so much more enjoyable.

I used the laser, polar alignment March 17th to take 150 pictures of the waxing gibbons moon.

G
Garry Edwards (The Guvna) (Sun Valley, US)
Great idea.

This is awesome for an old feller like me with a busted up back and knees, who doesn’t like to bend down too much. Especially trying to look through that little eyepiece on the polar alignment scope on my star adventurer 2I trying to get close to Polaris.
With this little laser and adapter I can get super close and just have to bend down for final spot on adjustment.
Super quick and easy. Love it.
Thank you MSM.

A
Andrew Lee (Croydon, GB)
Makes polar aligning FAST

Yes you will need to check local laws, in your country, to be sure that the use of this laser is within the law... and commonsense should tell you you do not... point it at other people, cars aircraft etc... That being said, it makes aiming your mount at Polaris, a piece of cake... As with the right angled polarscope attachment, I've not had the change to properly test it yet, but have tested it and it is very visible. Dark skies will come eventually...

S
Sean O’ (San Rafael, US)
It really works! Also consider using the 90 degree ‘back saver’

Used with my SkyWatcher Star Adventurer, initial polar alignment is extremely quick and efficient. Securely attaches to the eye piece housing. I then use the 90 degree ‘back saver’, which also securely attaches to the eye piece housing, in conjunction with the polar align utility within the SAM console app and can finish polar aligning quickly and smoothly which craning my neck at tough angles. Both of these attachments are not gimmicks, they actually work! Set up and capture of Orion Nebula in under 10 minutes

m
michael barrett (Atlanta, US)
UNBELIEVABLY easy to calibrate to Polaris with this attachment!

I've got an iOptron SkyGuider Pro celestial tracker and this has been a game changer for me. During my first shoot with this laser kit earlier this week, I was able to polar align in less than 30 seconds and got amazingly crisp images. Before this, I found the proper polar alignment process to be incredibly frustrating and the "eyeball" technique pretty rough.
On this shoot, I was with a deep-sky telescope photographer who was also amazed at how quick and accurate my setup was.
("...man...it takes me at least :10-:15 to polar align my scope and you did it in less than 1/2 a minute!...")
btw - my laser kit did arrive out of alignment but it was very quick and easy to calibrate it to dead center, especially after I watched a YouTube video that highlighted a simple fact:
When the laser is aligned correctly, the green point will not move as you spin the pointer on its axis. Alignment controls are simple screw head adjustments and the entire process of alignment took me all of about 3 minutes.

J
Jay Schinkel (New York, US)
Super Fast Alignment

I took this out in my front yard for the first time and I had alignment within just a few seconds that was good enough for 2 minute exposures. I haven't tried anything beyond two minutes because I'm still using the factory base for the Sky Guider Pro and once I've upgraded to the Williams Optics base for my tracker then I'll try longer exposure times. It's a great product. I'm 6'5" so getting down on the ground to look thru the reticle was a real pain. I'm very impressed with this little setup. It took it a minute to get it from overseas. It would have been nice if they stocked those items in the U.S.

B
Bruce Herwig (Riverside, US)
Best astro gadget I've ever purchased ever. End of Story.

Polar alignment has always been a pain...this laser fixes that and makes it super simple. I have the iOptron Skyguider Pro. I screw it in, shoot the laster, and point to Polaris. It gets me to where Polaris is in the polar scope 100% of the time, on the first try. No going back and forth, hunting, wondering if I have the right star. It's visual, it's simple and it's quick! I then make fine adjustments from there, and I'm off and running. I can't recommend this enough. It's the best $50 I've spent on improving my enjoyment of astrophotography bar none!!!

N
Natasha Albon (Warrington, GB)
Great bit of kit

Love this laser and adapted for my iOptron sky guider pro. As a new user of a tracker, I found polar aligning REALLY hard. Especially loving at a higher latitude. This was a game changer- polar aligned properly within 5 minutes and no sore back and neck!

M
Mihály Terhes (Szeged, HU)
Hiánypótló

Nem értem a Skywatcher miért nem gyárt hasonlót sem. Igazán könnyű vele pólusra állni. Sok időt lehet vele megtakarítani, ami rövid éjszakákon nem mindegy.

J
John Race (Burnhope, GB)
Great piece of equipment

I use this kit every time I polar align. It’s good for landscape astrophotography and for deep sky after adjusting the alignment slightly afterwards. It’s certainly sped my workflow up considerably and would recommend it to anyone. I even reviewed it on my Facebook page, Northern skies photography. Thanks move shoot move.

R
Roy Elbers (Utrecht, NL)
Move shoot move laser

It saves so much time with aligning my star adventure. Makes it super easy and precise.